8LS - General motor data

Yes

E360421

3x 400 VAC ... 3x 480 VAC ±10%

Circular connector

speedtec system, sizes 1 and 1.5

speedtec or itec system

Terminal box

M10 or M12

speedtec or itec system

htec circular connector with speedtec system, size 1

---

F

Self-cooling, free circulation surface cooling (IC4A0A0)

External cooling, surface cooling with machine-mounted independent fan component (IC4A0A6)

Self-cooling, free circulation surface cooling (IC4A0A0)

External cooling, surface cooling with machine-mounted independent fan component (IC4A0A6)

Maximum winding temperature is 155°C (limited by the thermal motor protection in the ACOPOS servo drive or in the ACOPOSmulti drive system to 110°C with EnDat feedback and 130°C with resolver feedback)

KTY83-110 (up to revision C7) / AM-LPTC1000 (revision C8/C9)

Vibration severity level AValid for all motors with an axis height greater than 56 mm.

DIN ISO 281

Form F

Starting with size 8

Yes

Form EExcept size 2, regular and reinforced bearing in sizes 5, 7 and 8

Form A

Form A keys, form N1 keyway

Shaft and fitment key convention

Form A

Tolerance R

Water-based coating

98160 *IDROLIN/E SM SEMIOPACO NERO RAL 9005-C.452

RAL 9005 flat; shaft end and flange front metallic glossy

S1 - Continuous operation

-15°C to +40°C

+55°CContinuous operation of the servo motors at an ambient temperature of +40°C to max. +55°C is possible, but this results in premature aging.

2000 mRequirements that go beyond this must be arranged with B&R.

65°C

IP64For IP64, the motor must be mounted with the mounting flange and this mounting must correspond at least to IP64 protection. Otherwise, only IP54 applies instead of IP64.

IP65

IP64⁵⁾, fan IP20

IP65, fan IP20

IP64⁵⁾

IP65

IP64⁵⁾, fan IP20

IP65, fan IP20

Horizontal, motor shaft aligned horizontally (IM 3001)

Vertical, motor standing on the machine (IM 3011)

Vertical, motor hanging on the machine (IM 3031)With the IM 3031 type of construction and mounting arrangement (vertical, motor hanging on the machine), there is a risk of production fluids or oils penetrating the motor on the flange side. Motors or motor-gearbox combinations that should be used with this mounting arrangement must therefore have at least IP65 protection on the flange side.

-20 to +60°C

Max. 90%, non-condensing

-20 to +60°C

Max. 90%, non-condensing

ebm-papst

4184 NXH

7114 N

6424 M

W1G250-HH37-52

Yes

DC fan with electronically commutated

External rotor motor

Ball bearings

IP20

24 VDC +16% / -50%

24 VDC +25% / -50%

24 VDC +33% / -50%

24 VDC +17% / -33%

11 W

12 W

105 W

Blocking and overload protection via PTC resistor

Partially impedance protected

Reverse polarity and stall protection

-30 to +70°C

-25 to +72°C

-20 to +55°C

-25 to +60°C

57 dB(A)

53 dB(A)

52 dB(A)

-

ebm-papst

3656 ZP

7450 ES

Yes

AC fan with external-rotor shaded-pole motor

Ball bearings

IP20

230 VAC

12 W

47 W

Impedance protected

Thermal switch

-40 to +75°C

-25 to +50°C

37 dB(A)

60 dB(A)